Posted on

Parts Bin

Parts Bin Digital Download

I was in dire need of some organization so I created the Parts Bin.

There is something just so satisfying about designing something that doesn’t require glue.

I needed something to get the workshop a bit more organized and here it is.

Fun little design with lots of sizes available and upon request.

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

Subscribe

* indicates required
/ ( mm / dd )
What do you want to be notified about?

Parts Bin

This is a fun little parts bin design that requires no glue. I would probably still use some just to firm it up in a shop but it is pretty sturdy with the right material thickness. Feel free to email me for a size request hereon Facebook, or in the Facebook group Glowforge Creators. I made this from 1/8 inch material I got from Ocooch Hardwoods. I don’t get anything for recommending them, I just really like their wood and shipping time. Always had a good experience.

The dimensions are 4 inches by 4 inches by 6 inches which may vary with the material you use. I have this dimensions for a few sizes listed in the product description.

If your nervous about the complexity of the setup, let these instructions ease your mind.

Download “Parts Bin Instructions” Parts-Bin-Instructions.pptx – Downloaded 13962 times – 557.56 KB

Some Endorsed Products

The wood for this project came from Ocooch Hardwoods though I often use  https://amzn.to/3oyG8Xq #ad as well.

I would highly recommend  https://amzn.to/3epaUvY #ad I also use  https://amzn.to/3Nt9d0E #ad as well. It doesn’t adhere quite as well but it is one of only a few 12 inch wide rolls I could find. I like it so far because of how easy it is to get off.

If you want to make gluing a lot easier I recommend  https://amzn.to/3qxshSz #ad with  https://amzn.to/3IqnOHX #ad. It really helps!

Download Here

As an Amazon Associate I earn from qualifying purchases.

Posted on

Kitchen Utensil Holder

The Kitchen Utensil Holder Digital Download is a fun little design for the kitchen counter. Organize your kitchen tools in nice little display! Fun and functional!

This is what it looks like on my counter!

Yes, that’s right, I use this in my own house.

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

Subscribe

* indicates required
/ ( mm / dd )
What do you want to be notified about?


Kitchen Utensil Holder Details

This is a fun little decoration for the counter that serves as a functional piece as well. I made this from 1/8 inch material I got from https://ocoochhardwoods.com/lumber/. I don’t get anything for recommending them, I just really like their wood and shipping time. Always had a good experience.

The dimensions are 6 inches by 6 inches by 6 inches which may vary with the material you use. I have this dimensions for a few sizes listed in the product description.

Some Endorsed Products

The wood for this project came from Ocooch Hardwoods though I often use  https://amzn.to/3oyG8Xq #ad as well.

I would highly recommend  https://amzn.to/3epaUvY #ad I also use  https://amzn.to/3Nt9d0E #ad as well. It doesn’t adhere quite as well but it is one of only a few 12 inch wide rolls I could find. I like it so far because of how easy it is to get off.

If you want to make gluing a lot easier I recommend  https://amzn.to/3qxshSz #ad with  https://amzn.to/3IqnOHX #ad. It really helps!


Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.


As an Amazon Associate I earn from qualifying purchases.

Posted on

Cat Shower Curtain Clip

The Cat Shower Curtain Clip Digital Download is a file I have been turning around in my head for a while now. I wasn’t sure how it would come out so finally I just made it. It didn’t take too long, made it in about 10 minutes in Inkscape and most of that time is because I am a perfectionist.

This is what it looks like.

Nothing too fancy but you can see the general idea.

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

Subscribe

* indicates required
/ ( mm / dd )
What do you want to be notified about?


Cat Shower Curtain Clip Details

This is a fun little decoration for the cat lover in all of us. I made this from acrylic that I got from https://cmsacrylics.com/ I don’t get anything for recommending them, I just really like their acrylic and shipping time. Always had a good experience.

The Cat Clip I made is from the black 1/8 inch acrylic. It cut great. The opening for the rod is 2 inches. They will have to slide over one end of the rod and they the curtain can be hooked to the ‘tail’


Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.

As an Amazon Associate I earn from qualifying purchases.

Posted on

The Pumpkin Shelf

The Pumpkin Shelf Digital Download is a file that allowed me to finally try my hand at kerf cutting. I am really happy with the way it came out. I am, as always, very thankful for all of the new users and encourage everyone to join the conversation and put in some requests in my Facebook group, Glowforge Creators.

This is what it looks like.

Assembly is pretty easy but may require some finess.

Download the instructions here if you want to see how its made before purchasing.

Pumpkin Shelf Instructions (12810 downloads )

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

You can purchase the file from my site by clicking the ‘Shop Now’ button below or find it on Etsy.



Some details

The pumpkin shelf is a fun little seasonal design. This file was made for wood supplied from Ocooch Hardwoods but I often use https://amzn.to/3oyG8Xq #ad. The shelf is currently dimensioned for material that is .125 inches thick.

Most of the files I create come in different sizes but this file is a little different. This is my first attempt at publishing a kerf cut file and adjusting the size will lead to some complications. I am willing to try for some variations but you will have to bear with me, pun intended.

If you have been following along with product recommendations, I tried the same new tape . The tape is from here https://amzn.to/3Nt9d0E #ad. Again, it does NOT adhere as well as other products and that is partially what I like about it. You will definitely want something for the kerf cut pieces because sanding it sucks!


Some dimensions

The material thickness this is dimensioned for is 1/8 inch (.125) and it works great.

The entire design is ~10 inches wide, ~8 inches tall, and ~2 inches deep.

I used about 1.5 sheets of standard 12 by 20 laser material to make mine. It will depend on whether or not you want to use the face piece.

Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.


As an Amazon Associate I earn from qualifying purchases.


Free Download

You can download the kerf cut pattern here for free:

Posted on

Crow Shelf

The Crow Shelf

The Crow Shelf Digital Download is a file that came in as another request from Facebook! Very thankful for all of the new users, tips and tricks! Please join the conversation and put in some requests in my Facebook group, Glowforge Creators.

This is what it looks like.

Assembly is really really easy.

Download the instructions here if you want to see how its made before purchasing.

Crow Shelf Instructions (14318 downloads )

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

You can purchase the file from my site by clicking the ‘Shop Now’ button below or find it on Etsy.



Some details

This file was made for wood supplied from https://amzn.to/3oyG8Xq #ad. The shelf is currently dimensioned for material that is .125 inches thick and .25 inches thick but I am adding more.

If you have been following along with product recommendations, I tried the same new tape . The tape is from here https://amzn.to/3Nt9d0E #ad. It does NOT adhere as well as other products and that is partially what I like about it. It does the job of preventing smoke and burn marks and then comes right off. I use a scrap piece of wood to push it on with some force and smooth it out after applying.


Some dimensions

The material thickness this is dimensioned for is 1/8 inch (.125) and it works great. There is an additional file for .25 inches. Reach out to me if you need it adjusted though and I will do what I can.

The entire design is ~10 inches tall, ~8 inches wide, and ~2 inches tall.

I used my batch conversion trick to turn all of my SVG’s into PNG and PDF’s on this file. If you haven’t learned the trick, its a real time saver. Take a look here.

I used about 1.5 sheets of standard 12 by 20 laser material to make mine. It will depend on whether or not you want to use the face piece.

Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.


Quick Tips

Ever wondered how to get some of the more complex shapes to fit into cutouts like this? Check out the quick video I made to get vector files for complex shapes and maintain their dimensions.

As an Amazon Associate I earn from qualifying purchases.

Posted on

Fourth of July Tiered Tray

Fourth of July Tiered Tray

The Fourth of July Tiered Tray Digital Download is a file that I though would be fun to take on. I wanted to make a display for some of the products from Jenny in the Discover New Designers page.

Please join the conversation and put in some requests in my Facebook group, Glowforge Creators.

This is what it looks like.

Assembly is really easy.

Download the instructions here if you want to see how its made before purchasing.

Fourth of July Tiered Tray Instructions (13886 downloads )
Assembly

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

You can purchase the file from my site by clicking the ‘Shop Now’ button below or find it on Etsy.



Some details

This file was made for wood supplied from https://amzn.to/3oyG8Xq #ad. The box is currently only dimensioned for material that is .125 inches thick but I am adding more.

If you have been following along with product recommendations, I am still using the new tape . The tape is from here https://amzn.to/3Nt9d0E #ad. It does NOT adhere as well as other products and that is partially what I like about it. It does the job of preventing smoke and burn marks and then comes right off. I use a scrap piece of wood to push it on with some force and smooth it out after applying.


Some dimensions

The material thickness this is dimensioned for is 1/8 inch (.125) and it works great. I will be adding more thicknesses shortly. Reach out to me if you need it adjusted though and I will do what I can.

The trays are 10, 8, and 6 inches in diameter and with an ~8 inch riser.

I used my batch conversion trick to turn all of my SVG’s into PNG and PDF’s on this file. If you haven’t learned the trick, its a real time saver. Take a look here.

I used about 3 sheets of standard 12 by 20 laser material to make mine.

Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.


Quick Tips

If you don’t like the idea of the sides getting in the way of your displays, put them on the underside of each tray instead of the top. It will add about an inch of height to the overall assembly but still provides a nice clean look.

As an Amazon Associate I earn from qualifying purchases.

Posted on

Hammer Gift Box

Hammer Gift Box

The Hammer Gift Box Digital Download is a file that came in as a request from Facebook. Please join the conversation and put in some requests in my Facebook group, Glowforge Creators.

This is what it looks like.

This design is just for the blank box but there are some images below of different things you can engrave on it.

Assembly is really really easy.

Download the instructions here if you want to see how its made before purchasing.

Hammer Gift Box Instructions (13512 downloads )

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

You can purchase the file from my site by clicking the ‘Shop Now’ button below or find it on Etsy.



Some details

This file was made for wood supplied from Ocooch Hardwoods and some cutoffs from https://amzn.to/3oyG8Xq #ad. The box is currently only dimensioned for material that is .125 inches thick but I am adding more.

If you have been following along with product recommendations, I tried the same new tape . The tape is from here https://amzn.to/3Nt9d0E #ad. It does NOT adhere as well as other products and that is partially what I like about it. It does the job of preventing smoke and burn marks and then comes right off. I use a scrap piece of wood to push it on with some force and smooth it out after applying.


Some dimensions

The material thickness this is dimensioned for is 1/8 inch (.125) and it works great. I will be adding more thicknesses shortly. Reach out to me if you need it adjusted though and I will do what I can. The dimensions for this can only be adjusted so much because of the nature of the design but I always do what I can for people.

The entire design is ~14 inches long, ~6 inches wide, and ~1.75 tall.

I used my batch conversion trick to turn all of my SVG’s into PNG and PDF’s on this file. If you haven’t learned the trick, its a real time saver. Take a look here.

I used about 3 sheets of standard 12 by 20 laser material to make mine but it will depend on how many Hammer sheets you use. That part is a matter of preference.

Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.


Quick Tips

Ever wondered how to get some of the more complex shapes to fit into cutouts like this? Check out the quick video I made to get vector files for complex shapes and maintain their dimensions.

As an Amazon Associate I earn from qualifying purchases.

Posted on

Bird Feeder Digital Download

The Bird Feeder Digital Download is a file I have been wanting to make for a while. My little bear (2 year old daughter) is fascinated by birds of late and I thought this would help keep her wide eyed for a bit longer.

This is what it looks like.

I have had a few varieties of birds approach it so far. The Eastern Bluebirds are wary but I am hoping they’ll come around.

Assembly is really easy.

Download the instructions here if you want to see how its made before purchasing.

Bird Feeder Digital Download Instructions (13124 downloads )

Join the mailing list to be notified of future Free files, Paid files, or Training Videos!

You can purchase the file from my site by clicking the ‘Shop Now’ button below or find it on Etsy soon.



Some details

This file was made for wood supplied from https://amzn.to/3oyG8Xq #ad. When I do, my cuts interlock best when I design for a material thickness of .115 inches.

I tried a new tape this time too. It is from here https://amzn.to/3Nt9d0E #ad. I will have to use this a few more times before I can get a real review for you but so far I like it. I will say, It does NOT adhere as well as other products and that is partially what I like about it. It does the job of preventing smoke and burn marks and then comes right off.


Some dimensions

The material thickness this is dimensioned for is 1/8 inch (.125) and it works great. There is also a file for .115 inches which is what I used and the press fit was so good I didn’t need to use glue. Reach out to me if you need it adjusted though and I will do what I can. The dimensions for this can only be adjusted so much because of the nature of the design but I always do what I can for people.

The entire design is 11 inches tall, 6.75 wide, and 6.75 deep thick.

I will be using my batch conversion trick to turn all of my SVG’s into PNG and PDF’s on this file. If you haven’t learned the trick, its a real time saver. Take a look here.

This will require a few pieces, I can’t remember exactly, of standard 12X20 inch laser sheets with some leftover.

Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.

As an Amazon Associate I earn from qualifying purchases.

Posted on

Hanging Moon Shelf

The Hanging Moon Shelf Digital Download is actually a file I made a while back but apparently didn’t release properly. I think I had it as a flash free file but then never posted it again!? Designing gets busy sometimes I supposed. Really fun and really functional piece.

This is what it looks like.

Hang your crystals or trinkets up for all to see.

Assembly is really easy.

Download the instructions here if you want to see how its made before purchasing.

Hanging Moon Download Instructions (15086 downloads )

Join the mailing list to be notified of future Free file, Paid files, or Training Videos!


You can purchase the file from my site by clicking the ‘Shop Now’ button below or find it on Etsy here.


Some details

This is actually made from the same file as the standard moon shelf download so if you have that al well you will notice a lot of the dimensions are the same. I design everything in Fusion 360 so when I decided to make this a hanging version, I added a few extrusions and cuts to the old file and here we are.

This file was made for wood supplied from Ocooch Hardwoods. I usually use wood supplies from here or from https://amzn.to/3oyG8Xq #ad. When I do, my cuts interlock best when I design for a material thickness of .115 inches.

I tried a new tape this time too. It is from here https://amzn.to/3Nt9d0E #ad. I will have to use this a few more times before I can get a real review for you but so far I like it. I will say, It does NOT adhere as well as other products and that is partially what I like about it. It does the job of preventing smoke and burn marks and then comes right off.


Some dimensions

The material thickness this is dimensioned for is 1/8 inch (.125) and it works great. Reach out to me if you need it adjusted though and I will do what I can.

The entire design is 11 inches tall, ~10 wide, and 2.25 inches thick.

I will be using my batch conversion trick to turn all of my SVG’s into PNG and PDF’s on this file. If you haven’t learned the trick, its a real time saver. Take a look here.

This will require two and a half pieces of standard 12X20 inch laser sheets with some leftover.

Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.

As an Amazon Associate I earn from qualifying purchases.


Posted on

Repeating Hexagon Shelf – The Next Steps

A new file finally available! This is a repeating hexagon shelf. Like the original post claimed, will be able to make one, two, as many as you want. The assembly should be very simple. There’s only three files. First, cut the bottoms. Then, insert the shelves. Next, insert the middle connector and just keep going.

This is the overall design.

You can keep it small or make it tall.

Assembly is easy as can be!

Very adjustable.


This is really the magic piece!

What’s next with repeating hexagon shelf?

I test cut all of my files before releasing them so that I can be sure there are not flaws. There was one time I got a little to big for my britches and didn’t test cut, and naturally, there was a flaw in the file.

Thus, my first step with any finished file is some test cuts.

Next, I adjust. This file was made for wood supplied from Ocooch Hardwoods. I usually use wood supplies from here or from https://amzn.to/3oyG8Xq #ad. When I do, my cuts interlock best when I design for a material thickness of .115 inches. I did that on this design and the fits worked great for 90% of the cuts. But, some of them were a bit more snug then I think customers would like.

Your Input?

So, I will be doing back to the design to make some variations. I will make a folder for varying material thicknesses ranging from the .115 inch that I use to .25 inches. If you have a material thickness in mind, comment at the bottom and I will add it in.

I added some of the picture below so you can see what the pieces look like in its current form.

I will be using my batch conversion trick to turn all of my SVG’s into PNG and PDF’s on this file. If you haven’t learned the trick, its a real time saver. Take a look here.

Keep an eye on the flash-free files for this one!

I am also still working to create a version of this to hang on a wall.

Drop your thoughts in the comments below or join the conversation on Facebook in the Glowforge Creators group.

As an Amazon Associate I earn from qualifying purchases.